Kuiet Kut Slab Grinder 20" wide infeed with new feed belt and new shear bar. Reliable and clean,...

Carriage Headblocks 12-volt over air with air dogs, air kickers, and air tapers. Equipped with n...

LT40 Wood-Mizer Band Mill 1997 model equipped with a new 38 HP Kohler engine and debarker. Runs ...

Frick O1C Automatic Sawmill 2-saw with a 50 HP electric motor on the vertical edger; Mill is pow...

High-capacity waste grinder featuring a 24" wide infeed belt, 125 HP, electric drive. Well-mainta...

O1C Frick Carriage 2017 model, Right-hand, 3 Head Block with hand setworks. Features a 10' carr...

The Lumber Tiger Resaw with Floating Head is a robust band mill thin kerf system, ideal for handl...

Morgan Single Head Resaw Powered by a 27 HP Kohler engine. Includes return belt, 25 used bands (...

The 1220 Timber King Band Mill is a robust and efficient sawmill, designed with durability in min...

Hurdle 3 head-block circle mill, includes 4 blade Cedar Creek vertical edger, includes log deck, ...

Mellott 3 strand log deck, 10' wide x 17' long, H-78 chain, electric Tulsa Winch drive, stop-load...

DA Hochstetler model, including the hydraulic unit , The outfit is in working condition, CALL 330...

3412 Cat Engine, Hydraulic Clutch, New Remote Control, 3x3 inch Screen with Baffles, 4x6 inch Scr...

2021, 5000 hr. driven by a 4045 John Deere, log loader, mudsaw, it is all hyd. (no setworks) in g...

This Wood-Mizer LT-70 Super Hydraulic Wide comes with a 55hp diesel engine with ONLY 60 hour on i...

The Double Head Shop Built Resaw is a practical choice for those needing a reliable sawmill solut...

2023, 4 1/2 x 36", LIKE NEW condition. 3-blade 1 is stationary.Hyd. motor included, Ready to hook...

1999, Accommodates up to 20" dia. 16' in length. 1.5' band width. Has been stored inside, in good...

2011, 4505 hr., 60 hp. John Deere diesel, hydraulic, log lift, computerized setworks, new belt & ...

The ProCut Single HD Resaw setup is a new, high-quality sawmill system designed for efficient lum...

The 2 Head Morgan Band Resaw is a used but functional band mill suitable for sawmill operations, ...

227 cutting hr. fully hyd. log lift, rest, front & back toe lifts, turner, & log clamp, power saw...

Morbark waste bark conveyor, 14" wide x 25' long, hyd drive, excellent condition

Used for processing small wood pieces such as edging strips. Equipped with an electric motor and ...

Mellott log turner #7, hyd drive, good working condition

Baker complete run-around system for grade resaw, electric powered, includes cab and all controls...

Mellott vibrating conveyor, 5 sections total, no drive, includes sawdust section, good condition

4 strand transfer deck, 8' wide x 14' long, electric drive, C-55 rooftop chain, good condition an...

concave belt conveyor 36" wide belt x 45' long, electric drive, very good condition

roll case with 3 strand pop-up transfer deck, 24" wide x 20' long, heavy duty and in good condition

roll case 24" wide x 22' long, heavy duty and in very good condition

Precision 6' x 6' screen, hyd drive, good working condition

unscrambler/ infeed deck, 4 strand deck, 10' wide x 15' long, all hyd drive, heavy duty and in go...

Shutte Buffalo waste grinder, horizontal feed 18" wide, includes blower on side, includes 1-1/2",...

3 strand x 8' w x 44" h unscrambler, hyd drive, good working condition

belt conveyor 12" wide x 20' long, approx 4" tall sides, hyd drive, working condition

Challenger waste grinder, 200 hp electric drive, 51" wide capacity, 1-1/2" screen, good condition...

Reckart dust blower, 29" dia, 10" inlet- 8" outlet, good working condition

HMC 3 strand log deck, H-78 chain, stop-load for debarker, 10' 6" wide x 19' long, Tulsa Winch el...

concave style belt conveyor, 30" wide belt x 95' long, electric drive, has cat-walk on the side, ...

HMC debarker, price includes a total Showcase Rebuilt machine.

Hershberger Mfg automatic slab saw, line-shaft ready, includes outfeed conveyor, good working con...

Reckart dust blower 24" dia blower, 10" inlet 8" outlet, electric drive, good working condition

Mellott vibrating conveyor 19" wide pan x 20' long, 4" tall sides, electric drive, sawdust screen...

Edmiston board edger, set up for tailing belt, hyd blade movement, electric drive, includes laser...

4 strand log deck, tulsa winch drive

Whirlwind 12" air-lock, electric drive, this unit is BRAND-NEW

approx. 140 gal hyd reservoir, pressure comp pump, 30 hp electric drive motor, working condition

3 strand transfer deck & unscrambler, deck is 8' wide x 13' long, both are gearbox drive, good co...

6" x 36" Crosby board edger, includes tailing belt, good condition

Whirlwind blower 10" inlet/8"outlet, AR-400 steel for fan and housing, very good condition

Hyd tank and cooler, approx 95 gal capacity, has cooling radiator and electric tank heater, very ...

With a 12' infeed. 125 hp electric motor, low hour machine, makes nice mulch.

4 strand transfer deck, 10' wide x 18' long, #100 roller chain, electric drive, good working cond...

4 strand transfer deck, 10' 6" wide x 15' long, 52" tall, 81X chain, good condition

4 strand green chain, 7' 6" wide x 18' long, C-55 rooftop chain, includes BRAND NEW DRIVE SHAFT/ ...

4 strand transfer deck, 10' wide x 27' long, PRICE INCLUDES BRAND NEW 81X CHAIN, good condition

sections of dead rollers, 10' long, 3- 21" wide available, 2" rollers - 3" center to center, exce...

Hyd drive for sawmill carriage, good working condition

5 strand green chain, 11' wide x 21' long, electric gear-box drive, C-55 rooftop chain, drive sha...

3 strand transfer deck, 10' wide x 18' long, 5 hp electric gear-box drive, 81X chain, good workin...

5 strand green chain, 11' wide x 65' long, electric gear-box drive, C-55 rooftop chain, excellent...

belt conveyor 24" wide x 18' long, no power, excellent condition

belt conveyor 11" wide x 37' long, approx. 4" tall sides, no power, excellent condition

Hanchett chipper knife sharpener, electric drive, good working condition

Continental hyd power unit, 5 hp electric drive, pressure comp pump, approx 10 gal reservoir, goo...

roll case 24" wide x 25' long, hyd drive, good working condition

2 head-block Renco circle mill, includes BRAND NEW FRICK DOGS, TAPERS AND SET-WORKS, includes fri...

roll case, 24" wide x 25' long, 6" dia rolls, good working condition

barn sweep, total 80' long-all flat, electric drive, working condition

transfer/ log deck, 3 strands, 8' wide x 20' long, H-78 chains, working condition

Mellott 4 strand transfer deck, is currently 5' long, price includes custom length up to 20' long...

5 strand unscrambler, electric drive, approx. 52" tall, good working condition

roll case, 50" wide x 22' long, 9" roller dia, each rollers has it's own hyd motor, heavy duty an...

40hp electric drive hyd unit, pressure comp pump, approx. 150 gal reservoir, includes cooling rad...

roll case/ transfer deck, rolls are 30" wide x 18' 6" long, has side-transfer chains, working con...

live roll case, 24" wide x 27' long, 2-way cant kickers, kickers are air powered, very good condi...

roll case, 24" wide x 16' long, hyd/ gearbox drive, some rolls have spirals, air powered pop-up s...

3 strand log deck, 10' wide x 17' 6 " long, H-78 chain, hyd Tulsa Winch drive, stop-load arms, go...

live roll case, 32" wide x 15' long, rolls are 6 1/2" dia, good working condition

Morbark 58" dia 3 knife chipper, good working condition, includes 2 sets of knives

Mellott #7 log turner, hyd drive, good working condition

4 strand transfer deck, 10' wide x 14' long, H-78 chain, gear box drive, good working condition

4 strand transfer deck, 10' 6" x 10' long, H-78 rooftop chain, electric gearbox drive, has board ...

FIFO unscrambler, 6 strands, 13' 6" wide x 70" tall, electric drive, board singulator, very good ...

HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition

4 strand transfer deck, 10' x 10', H-78 rooftop chain, hyd drive, air powered board stops, good c...

roll case, 24" wide x 43' long, electric drive, comes in 2 sections, includes spiral section and ...

concave belt conveyor, 36" wide x 30' long, electric gear box drive, good working condition

saw sharpener for circle blades, up to 36" dia blades, electric drive, working condition

Cornell edger, 36" wide x 6" thick capacity, 40 hp electric motor powered, includes infeed roller...

Montgomery 34" hog, horizonal feed, bottom discharge, includes 100 hp electric motor, includes BR...

dust blower, 50" dia, 18"inlet/outlet, 40 hp electric motor for power, good working condition

belt conveyor, 2 sections, 24" wide x 25' long, one section is hyd drive the other section is ele...

Miner edger, 4" thick x 24" wide capacity, 1 stationary, 2 movabe blades, 5' infeed, 8' outfeed, ...

5 strand Mellott unscrambler, electric drive, 81X chain with lugs, 10' 6" wide x 59" tall, excell...

5 strand transfer deck, 10' 6" wide x 9' 6" long, 81X chain, electric gearbox drive, has air oper...

2 strand transfer deck, 32" wide x 10' 6" long, working condition

belt conveyor, 30" wide x 9' long, hyd drive, good condition

belt conveyor, 16" wide x 32' long, electric drive, 1 1/2" tall sides, heavy duty and in very goo...

belt conveyor, 8" wide x 32' long, 1 1/2" tall sides, heavy duty and in very good condition, 2 av...

Mellott vibrating conveyor, 24" wide pan, 8" tall sides, electric drive, chipper spout, very good...

Fulghum 48" dia, 6 knife chipper, recently in production, working condition

Roll-case/ transfer, 36" wide x 21' long, has 3-way sorting, tipple arms for both sides, air oper...

Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent ...

Brewco Speed-Cut chop saw, 15 hp electric power, 20" dia blade, air operated controls, good worki...

transfer deck, 4 strands, 3' wide x 4' 6' long, H-78 rooftop chain, no drive ,excellent condition

Shutte - Buffalo waste grinder, 18" wide, top feed, 3600 rpm's, includes numerous spare parts, go...

Webster vibrating conveyor, 18" wide x 25' long, electric drive, good condition

Baker PAQ-O band resaw, 6" wide capacity, line-shaft ready, good working condition

Cornell style 24" dia blower, 10" inlet- 8" outlet, good condition

Cornell gang edger, 6" thick capacity, edger side is 21" wide- gang side is 16" wide, 1 movable b...

Corley double end trim saw, 8" thick capacity, electric drive, good working condition

Reckart 4 strand transfer deck, 10' wide x 16' long, C-55 rooftop chain, electric drive, very goo...

Mellott roll case 24" wide x 15' long, no power, very good condition

Newman chipper knife sharpener, holds up to 8 knives, single phase 220 volt electric drive, semi-...

log deck, 3 strands 12' wide x 25' long, electric drive, H-78 chain, includes stop-load and 5' lo...

belt conveyor 24" wide x 50' long, approx 4" tall sides, electric drive, good working condition

Roll case 24" wide x 19' long, 81/2" dia rollers, hyd drive, heavy duty and in good working condi...

belt conveyor 18" wide x 6' long, hyd drive, approx 4" tall sides, very good condition

Keystone gang saw, 6" thick x 12" wide capacity, single arbor, indexable sizer head, electric pow...

Cooks edger, 6" thick x 36" wide capacity, 2 movable blades, set up for tailing belt, hyd drive, ...

2 strand transfer/ cant bunk, transfer deck has 2 pop-up arms 56" long for roll-case, 10' long de...

belt conveyor, 24" wide x 6' long, good condition

Mellott shaker table, 16' wide x 6' long, hyd drive, excellent condition

Mellott #8 log chain type log turner, RC140 chain and #80 drive chain, hyd. drive, good working c...

Roll case, 24" wide x 19' long, hydraulic drive, very good condition

Shop built gang saw with variable speed feed, 6" wide x 6" thick capacity, line-shaft ready, incl...

Brewco 2 head resaw with complete run-around system, electric/ hyd powered, good working condition

Morgan double end trim saw, 6" thick x 68" long capacity, line-shaft ready, feed is hyd driven, g...

Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent co...

pan is 18" wide x 9" tall sides, 65' long, includes sawdust section, electric drive, good working...

spiral roll case approx. 24" wide x 18' long, electric drive, good condition

chop saw for cants, 7" thick x 12 "wide capacity, 18" wide x 14' long infeed, 18" wide x 10' long...

2019 Accu-Cut edger, 6" x 40" capacity, 3 blades- 1 movable set, variable speed in-feed, includes...

belt conveyor 24" wide x 40' long, no sides, good working condition

Cornell double arbor gang saw, 6" thick x 24" wide capacity, 2- 100 hp electric motors for arbors...

24" x 24' long section, Jeffery vibrating conveyor, drive section included, working condition

Carrier vibrating conveyor, 24" wide pan x 50' long, 12" tall sides, electric drive, very good co...

Roll case, 30" wide x 41' long, has several sections of spirals and several stops, very good cond...

LH, 4 HB, opens to 36 in, carriage is 20 ft. in length, electric setworks, includes track/frame, ...

Model #7, RC160 chain, 48 in. Hyd. drive, GOOD CONDITION

with a 15 HP electric drive, VERY good condition

7 1/2 HP. electric motor, 200 gal. vertical tank, good condition

waste grinder, 24" wide infeed belt, 125 hp electric drive, good working condition

Sering HD36 bar type log turner (36" stroke), needs vertical cylinder, top roller, and bottom tooth

Morris 6 strand, 14' long, electric drive, good working condition

5 strand, 7' tall x 13' wide, working condition

rotary 230 volt, 25 HP phase converter, excellent condition

Showcase Rebuilt! Hurdle 3 head-block carriage, includes complete mill package, track/frame/ driv...

8' wide x 17' long capacity, electric drive, complete unit ready to go

Precision 58" dia, 6 knives, COMPLETELY REBUILT!! comes with warranty, BRAND NEW condition! ready...

18" wide x 18' long, hyd drive, approx 4" sides, good condition

3 blades, 2 movable, 50hp electric drive, 6" capacity, good condition

50' L, hyd drive, 24" pan, 8" sides, includes sawdust screen section and chipper infeed spout, hy...

SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center...

Hydraulic tank, and 2 hydraulic pumps

16" dia, electric drive, good condition, 3 available

4'x5'

26" wide x 95' long, approx 6" sides, electric drive, good condition

150hp, 1775rpm, 4445T frame, working condition

Meadows 4" x 36" capacity edger, infeed/outfeed, 2 movable blades, includes 2 Brand New blades, t...

Cornell 4" thick x 27" wide capacity, 1 stationary-1 movable blade, includes infeed, this edger i...

26" HD top feed waste grinder, bottom discharge, price includes all new teeth and anvils, excelle...

roll case 20" wide x 13' long, heavy duty 6" dia rollers, dead rollers, good condition

concave belt, 24" wide x 40' long, hyd drive, includes all new rollers in belt, excellent condition

Morbark 48" dia 3 knife chipper, Fulghum 5' x5' shaker screen w/ cyclone, electric drive on shake...

Webster 24" wide pan x 35' long, 10" sides, electric drive, good condition

6" x 36" capacity, 8' infeed/4' live outfeed, 1 movable & 1 stationary blade, this unit is comple...

roll case 24" wide x 20' long, 7" dia rolls, no drive, good condition

5 strand green chain, 10' 6" wide x 50' long, 81X chain, electric drive, excellent condition

Morgan chop saw, line shaft ready, 22" dia blade, includes 1 extra blade 10' infeed/5' outfeed, g...

4 strand transfer deck, 10' wide x 26' long, 81XH chain, electric drive, good condition

4 strand green chain, 7" 6" wide x 53' long, 81X chain, electric drive, good condition

4 strand unscrambler, built for pallet cut-stock, adjustable length, electric drive, excellent co...

hyd unit, 20 hp electric drive, pressure comp pump, approx 80 gal tank, good condition

Miner 3 blade vertical edger, 50 hp electric drive, self-contained hyd unit, includes various spa...

roll case with transfer, 24" wide x 12' long roll case, 3 strand pop-up transfer deck 10' 6" wide...

Mellott 24" wide pan x 62' long, sawdust screen section, 8" tall sides, electric drive, good work...

hydraulic reservoir, 32" wide x 56" long x 30" high x approx. 175 gal capacity, good condition

Hyd power unit, 30 hp electric power, pressure comp pump, approx 50 gal capacity, good condition

SMC air dryer, single phase 220 volts, air flow; 5200 l/min, working condition

Koger dust blower, 38" dia, top discharge, 18" inlet/ 16" outlet, good condition

48" dia dust blower, 18" inlet/ 15" outlet, good condition

3 strand green chain, 9'6" wide x 40' long, C-55B rooftop chain, good working condition

Waste conveyor, 24" wide pan x 73' long, electric drive, ladder-back chain, working condition

chip drag, 18" wide paddles x 35' long, heavy duty built, excellent condition

waste conveyor used for chips, 18" wide paddles x 58' long, electric drive, heavy duty built and ...

24" wide x 68' long belt conveyor, approx 6" tall sides, electric drive, good condition

roll case 24" wide x 14' long, 11" dia rolls, good working condition

roll case 31" wide x 14' long, Heavy duty, working condition

roll case 30" wide x 17' long, heavy duty and in very good condition

light duty roll case 52" wide x 60" long, electric drive, 2 1/2" dia rolls, working condition

16" wide x 9' incline belt conveyor approx. 4" tall sides, electric drive, excellent condition

belt conveyor 12" wide x 6' long, approx 4" tall sides, good condition

Newman 4 knife sharpener, all automatic, electric powered, good working condition

Morbark waste grinder, horizontal feed, set up for line-shaft power, includes drag chain for prod...

Morgan double end trim saw, Serial # 062800311, minimum 20", max. 60" wide capacity, electric dri...

belt conveyor 22" wide x 9' long, was used as off-bearing belt, working condition

Reckart 36" chain type turner, all hyd powered, excellent condition

Webster vibrating conveyor drive section, 24" wide pan x 10' long, good working condition

belt conveyor, 10" wide x 9' long, no drive, includes very good belting, sides are concave style

Roll case, 24" wide x 19'6" long, 4 1/2" dia rollers, hyd drive, includes self-contained hyd unit...

2 strand transfer deck, 5' wide x 12' long x 47" high, H-78 chain, electric drive, board/ cant st...

4 strand transfer deck, 12' 6" wide x 4' long, C-55 rooftop chain, hyd drive, good condition

Belt conveyor 4" wide x 15' long, approx 4" tall sides, electric drive, good working condition

Belt conveyor 24" wide x 18' long, approx 7" tall slanted sides, hyd drive, excellent condition

CM&E 48" dia, 8 knife chipper, working condition but shows considerable wear, should be rebuilt, ...

200 gal vertical air tank, good condition

Cornell single arbor gang saw, 4" thick x 24" wide capacity, would work well for stringers, comes...

belt conveyor 20" wide x 22' long, no drive, good working condition

Baker deduster, 8" wide capacity, electric drive, includes new brushes, excellent condition

circe saw husk, 56" dia blade, includes Tyrone Berry carriage drive, good working condition

36" dia dust blower, 20 hp electric powered, 14" inlet- 12"x15" outlet, excellent condition

Precision 58" dia chipper, 6 knives w/ 3 blocked, before and after pics, COMPLETELY REBUILT AND C...

Precision 48" dia chipper, 6 knife- 3 are blocked, top discharge, working condition

Morgan single arbor gang saw, capacity 12" wide x 5 1/2" thick, 100 hp electric drive on arbor, f...

Cresswood style, 4" thick x 32" wide capacity, electric drive on feed rolls, complete unit ready ...

2 blades, hyd. cylinder for blade movement, in good condition

8"x20" wide capacity, set up with stationary blades, 50 hp. electric drive, includes infeed rolle...

Mellott roll case 30" wide x 18' long, rolls are 8" dia, heavy duty and in excellent condition

includes carriage track & frame, AC carriage drive, Mellott Operator cab, electric setworks, this...

Hemco, 9 head drop saw trimmer, 7-1/2hp motors, 16' long capacity, includes infeed and waste conv...

30' L, hyd drive, 17" pan, 4" sides, good condition

This used 3 Blade Meadows Edger by Meadows Mills is a reliable piece of equipment ideal for sawmi...

The 2 Strand Live Deck by Meadows is a robust and efficient component for sawmill operations. Thi...

This used sawmill setup includes several key components for efficient milling operations. The set...

It has the hydraulic lift (It does need the control panel)

The Bill Turner Sawmill is a used band mill designed for efficient lumber processing and is parti...

The S & W 2 Blade Edger is a robust and efficient sawmill tool, ideal for board edging tasks. It ...

The Accu-Cut Edger is an efficient and reliable machine designed specifically for sawmill operati...

The LT40 Wide Wood-Mizer is a portable bandmill ideal for those in need of efficient lumber proce...

The 2 Head Go-Fast Band Resaw is a reliable piece of equipment designed for efficient wood proces...

The Timber King B20 Bandmill is a fully hydraulic sawmill designed for efficiency and precision. ...

Heavy duty, all hyd., 4 strand, 10' x 26' long, hyd. controls included. 7 years old and in very g...

The Precision Debarker is a used piece of sawmill equipment, expertly rebuilt in 2021 by Showcase...

Cleereman Complete Circular Mill - Cleereman Left Handset model 36 - 3 Headblocks - Silvatech com...

2007 TimberKing 1600 - Hydraulic log loader, new hydraulic hoses - Kohler 25 HP gas engine with a...

2006 Wood-Mizer LT40 Super Hydraulic - 51 HP CAT Engine - 6300 Hours - Debarker - Lube Mizer - Ac...

Sawmill bed with chainsaw bar head. No motor. 20 ft bed and 53" chainsaw bar head. Can cut horizo...