Attachment-Logging
Case 850C Crawler
the machine is in working order all but the foot steering does not work, forks & bucket included....
John Deere 650J Dozer W/ a cable winch
in Good condition . Call for more info 440-313-8683 Make: John Deere | Stock number: 13400A | Updated at: 20...
540D Turbo John Deere cable skidder
hr? , tires 30%, hydraulics all work good and tight, little oil leak on the transmission add a li...
Floating Logging Forks
THESE ARE BRAND NEW, attach to the skid loader, 1030 lb. weight, 2 5/16" ball hitch, chain hook, ...
Band Mill Thin Kerf
TimberKing 2220 Bandmill
BRAND NEW operated very little on DEMO only, Kubota diesel, Computerized setworks, Hydraulic, por...
LT300 Wood-Mizer
9187 hr. electric, green chain, cab, Accu-set setworks, 15' conveyor, Hey guys this mill is in go...
XP 380 Timber Buddy Bandmill
4045 John Deere 120hp. 1600 hr. engine, Laser, loglift, Computer setworks, mudsaw, 36"x 20' log c...
XP 380 Timber Buddy Bandmill
4.3 liter cummins 2019 year, this is a good mill , Broke in ready for work . CALL 304-492-5265 Make: Timber ...
LT15 E10 Wood-Mizer Bandmill
Electric, 3 phase, 50 hr. useage, Power feed, Extra length bed, 20+ blades, 24"dia.x 22' cutting ...
Band Mill (Wide)
Franco Wide Band Head / Frick Carriage mill
This mill was setup in 2019, RH, Hand setworks, power receder, 4 hd Block, 4 axle. Belt friction ...
Carriage Drive (Sawmill)
Helle Track and Frame (no carriage)
36" center - center of track X 45', carriage drive w/ hyd. motor, model B 563 chain turner, 60'' ...
Carriage (Sawmill)
Helle RH 3 HB Carriage
Self contained hyd. pack, fully hyd. carriage, 1" tong dogs, hyd. over 110V setworks, 4axle, 8' x...
Chop Saw
Morgan Chop Saw
Infeed and outfeed rollers,Multiple adjustable stops, 22" blade, 10HP. 3 PH. motor, Was using it ...
Chop Saw
Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent ...
Circular Sawmill
Hurdle Circular Sawmill A complete setup
2011, RH. 3 headblock 36" carriage.Hurdle Cam setworks. Accut-Max mandrel on the mill. 3 blade ve...
A Complete Circular Mill GOOD Condition
Meadows mill, RH, hand set, 4 HB. Power receder, 40' track, JD 6 cylinder diesel 331 hr.,Baker 2....
Conveyor
Conveyor Belt
24"pan 12"sides 60'long, a good frame, 10 hp electric drive, the belt is same as NEW, in good con...
Conveyors Belt
Belt Conveyor
cleated belt conveyor, 24" wide x 18' long, set up for incline, electric drive, excellent condition Make: Un...
Conveyors-Live Roll
Roll Case
Roll case/ transfer deck, rolls are 30" wide x 38' long total length, transfer is 52" wide and 38...
Roll Case
roll case/ transfer deck, rollers are 30" wide x 19' long, transfer is 52" wide, electric drive, ...
Deduster
Deduster
Baker board deduster, up to 8" wide capacity, electric drive, price includes all new brushes, fee...
Edgers-Board
Accu-Cut Edger
a good machine. Line shaft ready. Laser lights Call 440-313-8683 Make: Accu-Cut | Stock number: 5101A | Upda...
Meadows Edger
new in 2016, 50 hp electric motor, 4.5"x 28", 3 blade 1 stationary, good condition . CALL 269-651...
A Handset Circular Mill and a Meadows Edger
4 x 36", 3 blade 2 are movable, 8' infeed & outfeed, 40-50 gas engine ( does not work ) edger is ...
Accu-Cut Edger
2 blade 1 movable, 4"x 24", 2.2 liter Perkins, She is broke waiting for work, CALL 304-492-5265 Make: Accu-Cut
KMS Edger
sn#6-23-027, 6"x 36", 3 blades 1 movable, lineshaft ready, SAME AS NEW, Write: Ben Swarey 16052 R...
Edgers-Gang
Schurman Gang Edger
4"x 48" capacity. Electric drive on feed rollers. Incudes control panel. Air cylinders on press d...
Forklift
Cat Forklift
2 Mast. Has sideshift. 21,156 hr. 17,500 lb. lift. In good condition Make: Caterpillar | Stock number: 100064
Cat Forklift
2 Mast. has sideshift. 23,300 hr. 17,500 lb. lift. In good condition Make: Caterpillar | Stock number: 100063
Gang Saw
Single Arbor Gang Saw
Single arbor gang saw. Infeed rollers. Lots of spacers. 40 or blades. 60HP. 3 PH. motor. EXCELLEN...
Pendu 5000 Gangsaw w/ Pendu 3200 Cant- Sizer
sn#81075, powered with a 6 cylinder Deutz diesel, sizer is lineshaft, includes 50 - 80 blades & s...
Hydraulic Power Pack
12 GPM Hydraulic Unit
3 cylinder Kubota diesel engine. (electric start) 50 gallon fuel tank, All enclosed with a steel ...
Log Loader
Takeuchi TL12V2 Skid Steer
here is a good machine, Cab has heat & AC. Fairly new track & under carriage, 2947 hr. Call 440-3...
D6C Case Crawler
73 Model, 5393 hr. 12' manual 6 way blade, 20" wide tracks, Brand New bearings on both frontal dr...
444E John Deere Wheel Loader
1989, 8700 hr. Pin on bucket, no AC in the cab, starts quick, a tight solid machine, 2 tires 50%,...
Notcher
Notcher
Single head notcher, 15 hp electric drive motor, indexable head, good working condition Make: Brewer | Stock...
Pallet Nailer and Assembly System
Pallet Chief 2
A 3 stringer nailer slightly used. New nail guns. Air/electric. You are getting a nailer, 90 degr...
Planer
36" Whitney Planer
New spiral head just put in. Hydraulic motors this unit is in Excellent condition. Call 440-313-2172 Make: W...
Portable Sawmill
Turbosaw Swing Blade
250 hr.28 HP Honda engine auto return, Auto remote blade swing, jockey transport wheels, extra bl...
Power Units-Engines
GM
587 hr. 5.43CI per REV, 2900 RPM, 5000 PSI sn# 6A168752RC, In working condition . Call for more i...
Resaw-Band
Baker Single Head Resaw
Model: AX, Electric, Good condition. Call 417-399-7400 Make: Baker | Stock number: 3092A | Updated at: 2024-...
Double Head Resaw
Return belt, 6" feed belt. 26"all steel band wheels, 24" between band heads, 1.25" bands, All mec...
Baker Single Head Band Resaw
Model BPO-O PAQ sn#99-061, with return belt, 6" wide belt, 12" blower - 4"in & outlet, w/ a 35 hp...
Scragg Mill
Scragg Mill (portable)
Shop built scragg mill in good condition. Needs some work and fine tuning. 10"x 10" x 8' cutting ...
Sharpening Equipment
Wadkin Profile Grinder
A good operating electric profile grinder. Call 740-630-3266 Make: Watson | Stock number: 15027A | Updated a...
Shavings Bagger
Shaving Baler-Bagger
DA Hochstetler model, including the hydraulic unit , The outfit is in working condition, CALL 330...
Straight Line Rip
Single Line Rip Saw
good condition 3 phase/480 volt Make: Ekstrom Carlson | Stock number: 100062 | Updated at: 2024-06-24 15:49:...
Trimmer
Trimmer
drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price ...
Wood Chipper - Stationary
Chipper
Fulghum 48" dia, 6 knife chipper, recently in production, working condition Make: Fulghum | Stock number: 7153
66" Morbark Chipper
66" Morbark chipper. 8 knife. Adjustable discharge chute. Plenty of knifes with it. ( NO POWER ) ...
