2021 Custom Built Extra Wide Hydraulic Band Sawmill #19762

2021 Custom Built Extra Wide Hydraulic Band Sawmill #19762

$59,000 REDUCED!


orCall +1 800-459-2148


Custom Built Wide Hydraulic Band Sawmill

77" width of cut. Up to 30ft long logs. 28" depth of cut. Dual chain drive (both sides of mill). Operators platform allows user to ride with mill. Cooks Saw 30" Band Wheels. Cooks Saw Mega Retrofit Blade Guides. Cooks Saw mill Idle Shaft. 1.5" x 363 3/4" Blade (roughly $65 per blade for Cooks Duratooth Band Blades)

This mill is powered by a 173HP Cummins Hydraulic Power Pack which supplies power to TWO Parker 3000 PSI hydraulic pumps. There are currently three hydraulic motors on the mill which all receive power from one of the pumps; the carriage raise and lower, the carriage travel, and the drive wheel. The second pump is available to power hydraulics which can be mounted in the bed to assist in leveling logs, rolling logs, and general log maneuvering during the milling process. This power pack was recently reconditioned by Cummins and has since had 1736 hours put on it.

This mill was built to handle the largest of logs, with a platform at the center of the mill bed to assist in supporting smaller logs, or standing up short logs to cut cookies. It was built with the intention of slabbing large logs, quickly, efficiently, and at ease to the operator. With a large demand for extra long beams, this mill was also designed to cut long, and very large (up to 28" x 28") beams.

Please note that shipping cost will be paid by the purchaser. Owner will be available to assist in the load up of the mill. All components, (carriage, bed and power unit) should fit on a 53' flatbed.


ManufacturerCustom Built
ModelExtra Wide Hydraulic Band Sawmill
Stock Number19762